Advertisement
PK-88 OPERATING MANUAL
AFILTER ON|OFF
Parameters:
ON
-
The ASCII characters specified in the MFILTER are filtered
from the outbound data and never sent by your PK-88.
OFF -
Characters in MFILTER list are only filtered from monitored packets.
Some terminals and computers use special characters to clear the screen or perform
other "special" functions. Placing these characters in the MFILTER list and turning
AFILTER ON will keep them from being sent to the distant station by your PK-88.
Exception: When ECHO is ON, and the terminal or computer sends a filtered character,
the PK-88 will echo it back to the terminal or computer.
AFILTER works regardless of mode, or CONNECT/CONVERSE/TRANSPARENT status. NOTE: verify
that AFILTER is OFF during Binary file transfers.
ALFDISP ON|OFF
Parameters:
ON -
A line feed character <LF> IS sent to the terminal after each carriage return
character <CR<CR>X
OFF -
A <LF> is NOT sent to the terminal after each <CR>
ALFDISP controls the display of carriage return characters received in packets as well
as echoing those that are typed in.
When ALFDISP is ON, the PK-88 adds a line feed <LF> to each carriage return <CR>
received. Each line feed received is ignored. Use the PK-88's sign-on message to
determine how carriage returns are being displayed.
•
Set ALFDISP ON if the PK-88's sign-on message lines are typed over each other.
•
Set ALFDISP OFF if the PK-88's sign-on message is double spaced.
ALFDISP is set correctly if the PK-88's sign-on message is single spaced. ALFDISP
affects your local display. It does not affect the data sent in any mode.
Mnemonic: AF
Mnemonic: ALFD
5-13
COMMAND SUMMARY
Default: OFF
Default: ON
PK88-95
Advertisement
