Advertisement
PK-88 OPERATING MANUAL
CSTATUS
CSTATUS is an immediate command used in multiple connections. When CSTATUS is typed,
your monitor displays:
•
The number of each logical channel.
•
The link state of all ten logical channels.
•
The current input/output channel - the one you're using.
•
Whether each channel connection is 'permanent.' (See CONPERM.)
Depending on your use of multiple connections and the USERS command, CSTATUS will show
you the following displays:
NOT CONNECTED TO ANY STATION
cmd:cs
Ch. 0 - 10 DISCONNECTED
Ch. 1 -
DISCONNECTED
Ch. 2 -
DISCONNECTED
Ch. 3 -
DISCONNECTED
Ch. 4 -
DISCONNECTED
Ch. 5 -
DISCONNECTED
Ch. 6 -
DISCONNECTED
Ch. 7 -
DISCONNECTED
Ch. 8 -
DISCONNECTED
Ch. 9 -
DISCONNECTED
If you're connected to several stations, the CSTATUS command shows your connect status
as follows:
CONNECTED TO SEVERAL STATIONS
cmd:cs
Ch. 0 - 10 CONNECTED to WX1AAA
Ch. 1 -
Ch. 2 -
Ch. 3 -
Ch. 4 -
Ch. 5 -
Ch. 6 -
Ch. 7 -
Ch. 8 -
Ch. 9 -
This sample display shows that:
•
CHANNEL 0 has the input and output channels - you're using it!
•
CHANNEL 1 is connected to WX2BBB 'permanently.'
•
All other channels' states are shown as they might appear with
multiple connections.
Mnemonic: CS
CONNECTED to WX2BBB P
CONNECTED to WX3CCC
CONNECTED to WX4DDD
CONNECT in progress
DISCONNECTED
DISCONNECTED
CONNECTED to WX5EEE via WX6FFF
DISCONNECTED
DISCONNECTED
5-36
Immediate Command
CONNECTED TO ONLY 1 STATION
cmd:cs
Ch. 0 - 10 CONNECTED to WX1AAA
Ch. 1 -
DISCONNECTED
Ch. 2 -
DISCONNECTED
Ch. 3 -
DISCONNECTED
Ch. 4 -
DISCONNECTED
Ch. 5 -
DISCONNECTED
Ch. 6 -
DISCONNECTED
Ch. 7 -
DISCONNECTED
Ch. 8 -
DISCONNECTED
Ch. 9 -
DISCONNECTED
COMMAND SUMMARY
PK88-118
Advertisement
