Advertisement
PK-88 OPERATING MANUAL
FRMR sent: xx xx xx
The PK-88 is connected but a protocol error has occurred. The PK-88 has sent a
special FRMR packet and is trying to resynchronize frame numbers with the
distant station. The string xx xx xx is replaced with the hex codes for the
three bytes sent in the information part of the FRMR frame. This message will
not appear if the PK-88 is in Transparent Mode.
FRMR rcvd: xx xx xx
The PK-88 has received an FRMR protocol error described above. This message
will not appear if the PK-88 is in Transparent Mode.
3.5
Special Keyboard Control Codes
Special uses have been assigned to certain keyboard characters. These
characters are usually typed from the Command Mode. See the Command Summary in
Chapter 7 for details on these control key commands.
CANLINE
CANPAC
COMMAND
PASS
REDISPIA
SENDPAC
START
STOP
TIME
XOFF
XON
3.6
Clear String Commands
The following commands can be cleared while in Command Mode by typing
the command word followed by a single percent sign (%), an ampersand (&)
or 'N,' 'NO,' 'NONE,' 'OFF' as the command's argument.
BTEXT
MHEARD
3.7
Detailed Command Descriptions
Chapter 5, Command Summary, presents detailed descriptions of each command
contained in the PK-88's operating system software. You will find more
information on the meaning, use and effects of each command, its parameters
and mnemonics, default values and arguments. Examples of command usage are
included.
CTRL-X
$18
CTRL-Y
$19
CTRL-C
$03
CTRL-V
$16
CTRL-R
$12
CTRL-M
$OD
CTRL-Q
$11
CTRL-S
$13
CTRL-T
$14
CTRL-S
$13
CTRL-Q
$11
CFROM
CTEXT
MTO
MYALIAS
3-10
DFROM
MBX
BASIC OPERATION
MFROM
PK88-50
Advertisement
