Advertisement
PK-88 OPERATING MANUAL
MFROM all,none,yes/no call1[,call2..] Mnemonic: MF Default: all
Parameters:
call
-
all, none, YES_list, NO_list.
list of up to eight call signs, separated by commas.
MFROM uses arguments to determine how the PK-88 monitors the packet channels and
displays information - which stations' packets will be displayed and which stations'
packets will be masked or hidden. MFROM is set to 'all' when you start the PK-88 for
the first time.
Type MFROM to display the ALL/NONE/YES_list/NO_list status of station call signs whose
packets will or will not be displayed. You can use the abbreviated command form or
mnemonic:
cmd:mfrom
MFROM
cmd:mf
MFROM
To stop any packets from being displayed, type MFROM NONE.
To display packets from one or more specific stations type MFROM (YES followed by a
list of calls signs). Packets will be displayed only from stations whose call signs
are listed after YES.
To hide or mask packets from one or more specific stations, type MFROM (NO followed by
a list of call signs). Packets from stations whose call signs are listed after NO will
not be displayed.
You can include optional SSIDs or extensions specified as '-n' after the call sign.
If MFROM is set to 'no WX1AAA' or 'yes WX1AAA' any combination like WX1AAA,
....
WX1AAA-1
WXlAAA-15 will be matched and processed. If MFROM is set to 'yes WX1AAA-1'
or 'no WX1AAA-1,' then only WX1AAA-1' will match and be processed.
When MFROM and MTO contain different types of arguments, to avoid any possible
conflict, the arguments take the following priority:
Clear MFROM with '%,'&,' or 'OFF' as arguments.
all
yes WX1AAA,WX2BBB,WX3CCC,WX4DDD
1.
ALL
2.
NO list
3.
YES list
4.
NONE
5-62
COMMAND SUMMARY
PK88-144
Advertisement
