Controls - Walinga Agri-Vac 3510 Operator's Manual And Parts Book

4.6 CONTROLS

Before starting to work, all operators should familiarize
themselves with the location and function of controls.
1. Gas Engine:
Read the engine manufacturers operator's manual
before starting for more detailed instructions.
a. Ignition Switch:
This 3-position key-operated switch controls
the electric power to the engine.
OFF
Turn key fully counter-clockwise to stop the
electrical power and turn o the engine.
RUN
Turn clockwise on detent to the run position.
This is the position where the engine will con-
tinue to operate.
START
Turn fully clockwise to the last spring-loaded
detent position to engage the starter solenoid
and start the engine. Release the key when
the engine starts and it will return to the RUN
position.
b. Choke:
This slide lever controls the position of the
choke. Move the lever to the left to close the
choke for starting when the engine is cold.
Move the lever to the right to open the choke
as the engine warms. Always move the lever
fully to the right when operating the machine.
c. Throttle:
This slide lever controls the engine RPM.
Move the lever to the left to increase engine
speed and to the right to decrease.
FIG. 4 ENGINE
b
c
a
21