Operating Safety; Maintenance Safety - Walinga Agri-Vac 3510 Operator's Manual And Parts Book

2.9 OPERATING SAFETY

1. Read and understand the Operator's Manual and
all safety signs before operating, maintaining, ad-
justing or repairing the Agri-Vac
2. Before servicing, adjusting, repairing or maintain-
ing unit, ensure that unit power source is com-
pletely shut down and can not start up.
3. Do not operate when any guards are damaged
or removed, Install and secure guards before
starting.
4. Keep hands, feet, clothing and hair away from all
moving and/or rotating parts.
5. Clear the area of all bystanders, especially small
children, before starting.
6. Before supplying electrical power to the machine,
be sure you have adequate amperage at the prop-
er phase and voltage to run it. If you do not know
or are unsure, consult a licensed electrician.
7. Clean re ectors, SMV signs and lights before
transporting.
8. Wear appropriate ear protection when operating
machine.
9. Do not place intake nozzle near feet when stand-
ing on the top of grain.
10. Review safety instructions annually.

2.10 MAINTENANCE SAFETY

1.
® .
2.
3.
4.
5.
6.
7.
8.
9.
Good maintenance is your responsibility. Poor
maintenance is an invitation to trouble. Follow all
operating, maintenance and operating instruc-
tions in this manual.
Follow good shop practices:
- Keep service area clean
and dry.
- Be sure electrical outlets
and tools are properly
grounded.
- Use adequate light for the
job at hand.
Make sure there is plenty of ventilation. Never op-
erate the engine of the gas model in a closed build-
ing. The exhaust fumes may cause asphyxiation.
Before working on this machine, stop engine or
motor and remove ignition key (gas) or turn power
o at the master panel (electric). Lock-out tag-out
machine.
Never work under equipment unless it is blocked
securely. Only use tools, jacks and hoists of suf-
cient capacity for the job.
Always use personal protection devices such as
eye, hand and hearing protectors, when perform-
ing any service or maintenance work.
A re extinguisher
and rst aid kit should
be kept readily acces-
sible while perform-
ing maintenance on
this equipment.
Periodically tighten all bolts, nuts and screws and
check that all electrical and hydraulic connections
are properly secured to ensure unit is in a safe
condition.
When completing a maintenance or service func-
tion, make sure all safety shields and devices are
installed before placing unit in service.
7