Walinga Agri-Vac 3510 Operator's Manual And Parts Book page 36

10. Specialty Crops:
When handling specialty products such as sun-
ower seeds, lentils etc, it is recommended that
the blower speed be reduced. This gives a gentler
action through the machine. Pulse crops are sen-
sitive to cracking so a gentler action is required to
minimize cracking. Electric models may need a dif-
ferent drive system installed. (Contact your dealer
or the factory for details.).
11. Entering Bins:
a. Open the vents to provide ventilation and to
allow air to replace grain being removed.
b. Do not enter bin if the grain is crusted or has
built up a hard surface.
c. Turn all other grain extraction equipment o
and lock-out tag-out.
d. Do not enter silo or bin until grain level is low-
ered to less than 12 inches (25 cm) above the
oor or solid footing.
e. Always have another person outside the facil-
ity to assist if the need arises.
f. Go around the facility picking up all the re-
maining grain.
26
Grain level is less than 12" above oor.
FIG. 10 GATHERING NOZZLE