Machine Break-In; Pre-Operation Checklist - Walinga Agri-Vac 3510 Operator's Manual And Parts Book

4.3 MACHINE BREAK-IN

Although there are no operational restrictions on
the Agri-Vac ® when used for the
recommended that the following mechanical items
be checked:
A. After operating for 1/2 hour:
1. Turn blower and airlock by hand. Be sure they turn
freely.
2. Retorque all fasteners and hardware.
3. Check the drive system. Re-tighten and re-align as
required.
4. Check for oil leaks. Stop leaks before continuing.
5. Check gas engine uid levels if so equipped.
6. Check oil level in blower reservoirs. Add as
required.
7. Lubricate all grease ttings.
B. After operating for 10 hrs:
1. Turn blower by hand. Be sure that it turns freely.
2. Retorque all fasteners and hardware.
3. Check the drive system. Re-tighten and re-align as
required.
4. Check for oil leaks. Stop leaks before continuing.
5. Check gas engine uid levels if so equipped.
6. Check oil level in blower reservoirs. Add as
required.
7. Then go to the normal servicing and maintenance
schedule as de ned in the Maintenance Section.

4.4 PRE-OPERATION CHECKLIST

E cient and safe operation of the Walinga
rst time, it is requires that each operator reads and understands
the operating procedures and all related safety
precautions outlined in this section. A pre-operation
checklist is provided for the operator. It is important
for both the personal safety and maintaining the
good mechanical condition of the Agri-Vac
checklist is followed.
Before operating the Agri-Vac
thereafter, the following areas should be checked o :
1. Lubricate the machine per the schedule outlined
in Section 5 Service and Maintenance.
2. Check gas engine uid levels if so equipped.
3. Check the oil level in the blower reservoirs.
4. Check the tires and ensure that they are in ated to
the speci ed pressure.
5. Check that the blower and airlock turn freely.
6. Close and secure all guards.
® Agri-Vac ®
® that this
®
and each time
19