Walinga Agri-Vac 3510 Operator's Manual And Parts Book page 38

i. Self-Dumping Hopper Bins.
13. Silo Bags:
Do not enter silo bags. To prevent pulling the plas-
tic into the nozzle, always slice the sides open and
roll them back before starting.
14. Nozzle Use:
When on top of grain, do not push the nozzle into
the pile next to the feet. The suction will pull the
nozzle and the operator into the pile. If the pile is
deep enough, the operator can be submerged un-
der the grain and is su ocated.
15. Operating Hints:
a. Try to keep the hoses as full as possible to
have maximum capacity.
b. Pull the intake nozzle out of the grain and
empty the machine before shutting machine
o .
c. Route the lines to minimize bends and cor-
ners. If a corner is necessary, use a large ra-
dius elbow.
d. Keep lines as short as possible to minimize
friction losses.
e. If long distance moving is required, push the
grain rather than pull.
f. If long distance moving is required, use
solid metal tubing whenever and wherever
possible.
g. Always ground the air and grain lines to pre-
vent static electrical build-up and sparking.
h. Always push both clamps fully over-center to
seal the junction and prevent leakage.
28
SELF-DUMPING HOPPER BINS
PART NO
10 ga Steel Hopper, Self Dump C/W Safety Chains
Capacity
(CY)
11-78297-6 .5
11-64331-6 1
11-78298-6 1.5
11-78196-6 2
11-70845-6 3
11-78299-6 4
11-78324-6 5
11-78325-6 6
FIG. 11 JUNCTION TYPICAL
DESCRIPTION
L W H Steel Lid (Optional)
(in) (in) (in) Part No
47 33 31 11-78281-6
59 40 38 11-78280-6
63 52 42 11-78282-6
70 58 44 11-78197-6
80 64 50 11-106955-6
78 84 50 11-78296-6
90 76 60
91 88 60