Controls And Displays; Operation; Pre-Operation Machine Preparation - Walinga Airlock 1008 Operator's Manual

OPERATOR'S MANUAL

CONTROLS AND DISPLAYS

Due to the wide range of applications in which a Walinga airlock may be used, refer to the
operator's manual of the auxiliary equipment for specific details pertaining to controls and
displays.

OPERATION

Pre-Operation Machine Preparation

For personal safety and to ensure the airlock is in good mechanical condition, the following
checks must be performed before operation of the airlock:
1. Clear the area of bystanders, especially small children.
2. Ensure the airlock has been properly serviced and maintained as per the described
methods and schedule as outlined in Section 7: Maintenance and Adjustments.
3. Refer to the operator's manual of the auxiliary equipment to ensure the airlock is
sufficiently powered and that the airlock is properly connected to the system.
4. Ensure the airlock rotates freely and is not obstructed and has not accumulated dirt,
dust, or debris. Clean out the interior of the airlock as necessary, ensuring the power
source is properly disconnected.
5. Ensure the power source is properly connected, refer to the auxiliary equipment's
operator's manual for any specific connection requirements or procedures.
6. Ensure all mechanical locking devices, anchor chains, and transport or storage devices
that would hinder or prohibit the normal function of the airlock have been removed.
Serious damage to the machine and/or personal injury to the operator or bystanders may
result from attempting to operate the machine while mechanical locking devices are in
place.
7. Close and secure all guards.
OPERATION 00-144476-0 A 6-3