Broadcastvision Entertainment AudioFetch Express User Manual page 33

1. Restore the WiFi module to default settings – follow procedure A) in section 10 Restoring Factory Defaults
with External Button
2. The AudioFetch Express will restart in Access Point mode with SSID: AudioFetchExpress and no
encryption/password
3. Connect a mobile phone, tablet, or PC to the AudioFetchExpress WiFi and access the Doghouse using default
username/password: ADMIN/admin
4. Select Wireless Client from the Operating Mode dropdown list
5. Enter your network SSID, Encryption, and Password information in the Client Mode Settings section
6. Click Save Settings button at the bottom of the page
7. Click the "OK" button in the warning dialog
a. The Status LEDs to begin a "marching" pattern to indicate the save is still in- progress. The march
will be: yellow, green, red, repeat....
b. The save will take some time, be patient and do not disconnect power
c. Then the AudioFetch Express will automatically restart and should begin operating in the new mode
8. After the restart, the new networking mode should be active and if correctly configured the status LEDs
should indicate the ready condition
Select Wireless Client
Enter your network's
WiFi SSID here
Selection Options
none (default)
WPA-PSK
WPA2-PSK (this is most common)
WPA-PSK/WPA2-PSK Mixed Mode
Select what matches your network settings
Enter your network's
WiFi password here
33