NOTE: AudioFetch recommends using the external button to restore factory defaults, as this
provides means to restore all settings to default values, including the networking mode settings. Use
of the external button is described in section 10 Restoring Factory Defaults with External Button.
9.10 CONTACTS & LINKS page
The CONTACT & LINKS page contains contact information in case support is required, as well as a link
to the online portal.
10 Restoring Factory Defaults with External Button
(this info applies to firmware 4018-04-16 and later)
There are two choices: A) restore only WiFi-related settings or B) restore all settings.
IMPORTANT: Do not remove power during the restore procedure.
A) Restore only the WiFi Module settings in the Network Setup Doghouse page:
1. Power up the AudioFetch Express and allow it to fully boot (about 35 seconds)
2. Press and hold the User Button, as soon as it is pressed all status LEDs will turn off
3. Continue pressing the button continuously for 10 seconds
31
Need help?
Do you have a question about the AudioFetch Express and is the answer not in the manual?