Multi-Box Setup Page - Broadcastvision Entertainment AudioFetch Express User Manual

After any changes are made on the NETWORK SETUP page, the "Save Settings" button at bottom of
page must be clicked in order for the new settings to take effect. When the Save Settings button is
clicked, the settings are saved and then the AudioFetch Express box will automatically restart. If DHCP
assigns a new/different IP address after the restart, then use the Doghouse Utility again to re-connect
to the Doghouse (if needed).

9.5 MULTI-BOX SETUP page

Where more audio channels are required, multiple AudioFetch Express (and/or wired AudioFetch)
boxes can be connected to the same network (called Multi-Box installation). Up to 32 boxes total may
be used in an AudioFetch system. When multiple AudioFetch Express units are used in Wireless Client
mode most WiFi Access Points will support a smaller quantity simultaneously. The recommended
maximum number of AudioFetch Express units connected in Wireless Client mode is 8.
The MULTI-BOX SETUP page is used to configure AudioFetch to work correctly in multi-box
installations.
In multi-box installations, the AudioFetch App needs to know how to coordinate the order of channels
it displays with channels from each of the AudioFetch boxes present. This is accomplished by
designating the AudioFetch Express (and any standard/wired) boxes present as:
BOX A BOX B BOX C BOX D . . . (32 choices, up to BOX AF)
18
Selection
Options
Box A
●
●
●
Box AF