Broadcastvision Entertainment AudioFetch Express User Manual page 20

Note: When multiple AudioFetch Express boxes are ordered to work together on the same network,
they will be pre-configured for you and this procedure will not be necessary.
To configure the boxes in a multi-box installation:
1. Decide how you want the channels from each box to be ordered by the App (which box's
channels display first, second, third, etc.).
2. Use the Doghouse Utility to find/display all of the boxes on the network.
3. Access the Doghouse for the first box (You want the App to display this box's channels first),
navigate to the MULTI-BOX SETUP page and use the drop-down selector to select "BOX A",
the new setting is saved automatically.
4. Access the Doghouse for the second box, navigate to the MULTI-BOX SETUP page and use
the drop-down selector to select "BOX B" (new setting automatically saved).
a.
NOTE: Each box has its own Doghouse, you must access each box's Doghouse
separately.
5. If a third box is present: access the Doghouse for the third box, navigate to the MULTI-BOX
SETUP page and use the drop-down selector to select "BOX C"
6. If a fourth box is present: access the Doghouse for the fourth box, navigate to the MULTI-
BOX SETUP page and use the drop-down selector to select "BOX D"
7. Continue this procedure for any additional boxes present.
20