Remote Control; More Product Information - Rigol DS4000E Series Quick Manual

RIGOL

Remote Control

English
DS4000E series digital oscilloscope can be connected to the PC via the USB,
LAN, or GPIB (option) interface to set up communication and realize remote
control through the PC. The remote control can be realized by using SCPI
(Standard Commands for Programmable Instruments) commands. DS4000E
series digital oscilloscope supports two ways of remote control: user-defined
programming and PC software (e.g. RIGOL Ultra Sigma).

More Product Information

1. Obtain the device information
Press Utility  System  System Info to obtain the information of the
instrument, including the manufacturer, model, serial number, as well as
software and hardware version number.
2. Check the option installation status
Press Utility  Options  Installed to view the installation status of
the current option.
For more information about this instrument, refer to the relevant manuals by
logging in to the official website of RIGOL (www.rigol.com) to download them.
DS4000E User's Guide
DS4000E Programming Guide
DS4000E Datasheet
18
introduces the functions of the instrument
and the operation methods, remote control
methods, possible failures and solutions in
using the DS4000E series, specifications, and
order information;
provides detailed descriptions of SCPI
commands and programming instances of
the instrument.
provides the main features and technical
specifications of the instrument.
DS4000E Quick Guide