Service Access - Care And Cleaning - Bunn Sure Immersion 220 Installation & Operating Manual

Care and Cleaning - General Cleaning
The use of a damp cloth rinsed in any mild, non-abrasive, liquid detergent is recommended for cleaning all
surfaces on Bunn-O-Matic equipment.
Exterior Surfaces:
• Do not use any abrasive materials.
• Use a soft, dry cloth to wipe down the exterior surfaces of the dispenser to maintain the luster of the
stainless steel finish.
• Wash the stainless steel interior surfaces of the dispenser with warm, soapy water. Rinse with warm,
clear water. If the water is hard, wipe the dispenser dry with a soft cloth to prevent spotting.
• Use cleaning cloth provided, to clean the acrylic door panel.
Daily: Parts Washing
1. Remove and wash the drip tray and drip tray cover in a mild detergent solution. Rinse thoroughly.
2. Wipe the lower front panel, door, and cabinet with a clean damp cloth.
Care and Cleaning
From the "Service Access" screen, press the
"Care and Cleaning"" button to access the
Care and Cleaning screens.
Cleaning supplies included with machine. Brush and cloth for touchscreen cleaning,
low foam tablets formulated specifically for the Sure Immersion™.

SERVICE ACCESS - Care And Cleaning

25
53058.0 071817