File Length; File Type; Ask When Stop; Record Schedule - Gatekeeper NiTRO 401 User Manual

Figure 12 : Estimated Record Time.
File L

File Length

File L File L ength ength ength Determines the length of the recorded file.
Options (All in minutes) 5,10,15, 20, 30, 45, 60

File Type

File Type File Type File Type AVI. This option is not user configurable.
Ask When Ask When Ask When Ask When Presents the user with an option to Stop recording when the Stop Button
Stop Stop Stop Stop (Item 5, Figure 8) is pressed on the Remote Control.
Options Yes or No
Record Record Record Record Allows recording to be captured only at specified times. Once Record
Schedule Schedule Schedule Schedule Schedule is highlighted press the Menu key once and a text input box will
appear. Use the navigation keys to highlight each time and enter values. Once
completed highlight OK and press the OK key on the remote control.
Channel el el el Chann Chann Chann It is highly recommended that this mode be left to its default settings. Channel
Mode Mode Mode Mode Mode is used to optimize a system utilizing a Student Protector Stop Arm
Camera.
Options 4 CH Separate; 4 CH Composite; 3 CH Separate; 3 CH Composite;
2 CH Separate; 2 CH Composite; 1 CH Separate; 1 CH Composite.

System.

System. System. System.
The System menu is divided into ten sub-menus and determines how the system will
be configured for Date; Time; Format, etc.
Video Video Video Video Selects the appropriate video signal to match with the camera signal type.
Default Value: Default Value: Default Value: Default Value: 5 Minutes 5 Minutes 5 Minutes 5 Minutes
Default Value: Default Value: Default Value: Default Value: Yes Yes Yes Yes
Default Value: See Figure Default Value: See Figure 1 1 1 1 3 3 3 3
Default Value: Default Value: See Figure See Figure
Figure 13 : Scheduled Recording
Default Value: 4 CH Default Value: Default Value: Default Value: 4 CH 4 CH 4 CH Separate Separate Separate Separate
- 32 -
The column TIP contains the information which appears both on the OSD and within
MaxVIEW™. To change the title of any or all three items highlight the required TIP and then
press the menu button on the remote control this will bring up a text dialog box, Enter the
descriptions as required and Press OK when completed.
PLEASE NOTE: The descriptions within TIP can be changed but be aware that the ICON which PLEASE NOTE: PLEASE NOTE: PLEASE NOTE:
is displayed within MaxVIEW™ that relates to the TIP action will remain constant. The ICON in
MaxVIEW™ cannot be re-assigned.
Motion Zone Motion Zone Motion Zone Motion Zone A 4 X 4 grid that can be configured to be triggered when the subject enters
the pre-defined area. Currently reserved for future development.
Motion Action Motion Action Motion Action Motion Action Determines if a channel will record or not when triggered by the defined area
in Motion Zone. Currently reserved for future development.
Motion Motion Motion Motion Determines the level at which Motion will trigger the settings within Motion
Sensitivity Sensitivity Sensitivity Sensitivity Action. Currently reserved for future development.
Motion Motion Motion Motion Configurable from 0 to 15. Currently reserved for future development.
Threshold Threshold Threshold Threshold
Video Lost Video Lost Video Lost Video Lost Allows an audible alert to be set and sounded when video is lost from single
or multiple channels
Motor. Motor.
Motor. Motor.
There are six options which are user configurable.
Vehicle Vehicle ID ID ID ID Vehicle Vehicle Up to twenty characters can be entered for Vehicle ID. To access press the
Menu key on the remote control. A text input dialog window will appear, use
the keys on the remote control to enter the required text and once
completed highlight the OK button and then press OK on the remote control.
The Vehicle ID will appear on the OSD if OSD is set to ON.
Note: Note: Note: Vehicle ID value also appears in the video file name. It is highly Note:
recommended this field be set uniquely for each vehicle.
Line Line Line Line Up to twenty characters can be entered for Line. To access press the Menu
key on the remote control. A text input dialog window will appear, use the
keys on the remote control to enter the required text and once completed
highlight the OK button and then press OK on the remote control. The text
entered for Line will appear on the OSD if OSD is set to ON. Please Note:
OSD, Line will be truncated to six characters only
Overspeed Overspeed Overspeed Overspeed Sets the speed limit when an alarm will be triggered.
Up to twenty digits can be entered for Overspeed. To access press the
Menu key on the remote control. A Digital Input dialog window will appear,
see figure 17, use the keys on the remote control to enter the required
Figure 16: Alarm Action Defaults.
Default Value: Off Default Value: Off Default Value: Off Default Value: Off
Default Value: None Default Value: Default Value: Default Value: None None None
Please Note: On Please Note: Please Note:
Default Value: Default Value: Default Value: None Default Value: None None None
- 37 -