Mounting Installation Instructions; Power Connections - Gatekeeper NiTRO 401 User Manual

Installation. . . . Installation Installation Installation
NOTE: NOTE: As of approximately December 2011 NiTRO™ and NiTRO-X™ cabling has changed. NOTE: NOTE:
The text below describes cabling after December 2011. For systems purchased and installed
prior to December 2011 please see Appendix for detailed cabling instructions.

Mounting Installation Instructions.

Mounting Installation Instructions.
Mounting Installation Instructions. Mounting Installation Instructions.
•
Remove NiTRO™ or NiTRO-X™ DVR and its associated mounting bracket from the
shipping box and set aside in a safe location.
•
Choose an appropriate location on the bus for mounting the NiTRO™ / NiTRO-X™ DVR.
•
Various mounting options can be considered e.g. On Bulkhead; Under Dash, etc. as long
as the unit is not inverted.
•
Using the Mounting bracket as a template, orientate and mark the location of the 3
mounting holes.
•
Use supplied self tapping screws, #8 x ½" hex head with internal start washer, to mount
the bracket securely.

Power Connections.

Power Connections. Power Connections. Power Connections.
Figure 1: NiTRO™ or NiTRO-X™ With Cables.
Retrofitting GSX / VCR Systems to NiTRO™ ™ ™ ™ and NiTRO
Retrofitting GSX / VCR Systems to NiTRO Retrofitting GSX / VCR Systems to NiTRO Retrofitting GSX / VCR Systems to NiTRO
Please Note: The cabling required for installation of either a NiTRO™ or NiTRO-X™ System is Please Note: Please Note: Please Note:
specific for that particular model and is not interchangeable. It is essential that the following
instructions be followed only for the model purchased, either a NiTRO™ or NiTRO-X™ System.
VCR/GSX to NiTRO VCR/GSX to NiTRO VCR/GSX to NiTRO VCR/GSX to NiTRO
(A). CAB000215 ( ( ( ( ( ( ( ( A1) Power. (A2) Sensor. (A3) GPS)) )) )) )) connects to Existing VCR Power
Harness DB25 Connector (E).
OR OR OR OR
(B). CAB000214 ( ( ( ( ( ( ( ( B1) Power. (B2) Sensor)) )) )) )) connects to Existing VCR Power Harness DB25
Connector (E).
(C). CAB000212 (Single Channel) OR CAB000213 Adapter cable connects to GSWHC2-XX
existing Camera Cable (D)
- 12 -
and NiTRO- - - - X X X X ™ ™ ™ ™ Systems.
and NiTRO and NiTRO
™ ™ ™ ™
DVR with or without GPS Module DVR DVR DVR with or without GPS Module with or without GPS Module with or without GPS Module
Systems. Systems. Systems.
- 57 -