Video Alignment Cable: Cab000157; Using The Gps Zoom Feature; Maxview Features; Using The Scrubber - Gatekeeper NiTRO 401 User Manual

Software version: 1123-s5r16/1

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

Using The GPS Zoom Feature.

When viewing the Vehicle Locator if you wish to

zoom-in there are two ways with which to

achieve this:

1) Use the Slider control to the left of the GPS

Mapping Window.

2) Place the cursor towards the Vehicle

Locator and when it changes to the GRAB

hand, double- click with the left mouse

button. This will auto-zoom in on the image.

Continue to do this until the required level of

zoom is achieved.

Continued usage will determine which method

you personally prefer.

MaxVIEW™ ™ ™ ™ Features.

MaxVIEW

Features.

Using The Scrubber.

When searching for a specific incident reported during the run of the vehicle a useful tool to

become familiar with is the Scrubber. The Scrubber is the vertical bar located in MaxVIEW™

on the grey bar below the actual video display area, A in Figure 31.

With playback paused, Figure 31, the

Vehicle Locator becomes static within MAP

view.

Note the position of the Scrubber Bar in

relation to the Time (B) and where the

Vehicle Locator (C) is positioned.

If the Scrubber bar is now moved either Backward

or Forward, depending upon the timestamp

required, the Vehicle Locator will also change its

relative position in the Map window.

Note the new position of the Scrubber and the

Timestamp (D) and the updated position of the

Vehicle Locator (E).

Figure 30: GPS Zoom Feature.

Figure 31: Using the Scrubber Bar.

Figure 32: Vehicle Locator Updated Position

- 46 -