Gatekeeper NiTRO 401 User Manual page 11

Existing Gatekeeper VCR Installations. Existing Gatekeeper VCR Installations
Existing Gatekeeper VCR Installations Existing Gatekeeper VCR Installations
Disconnect the VCR power cable (16 AWG White wire and Black wire) from the battery. Cut
the cable to remove the VRS™ Box Assembly (F) from the VCR power cable.
Insert a piece of 2½" length of ¼" heat shrink to one end of the cable. Strip ¼" (6mm) of the
insulation from the end of each wire. Reconnect the Live (White) wire and the Ground (Black)
wire by crimping the butt connectors (not provided) with proper crimping tool.
Move the heat shrink to cover the connection and apply heat to ensure tight fit of the heat
shrink.
Connect the provided fuse assembly to the Live wire of the VCR power cable. Then reconnect
the power cable to the battery.
•
DVRWPCRC-150 - RCA Single Patch Cable
Used to connect the Video Out cable to a monitor (has male connectors on both ends).
•
GSX-N40XMANUAL – NiTRO
A user guide for NiTRO
•
DVRIVIN40XMAX_CD - CD with MAXVIEW
The CD contains the MAXVIEW 400 software, softcopy of NiTRO
file and NiTRO
Firmware Upgrade Procedure.
(B) Intermediate Download Kit (P/N: GSX-NTR40X-DPBK-Intermed Kit)
•
Basic Download Kit (P/N: GSX-NTR40X-DPBK-BASIC KIT) as listed above.
•
CAB000157 - Video Alignment Adapter Cable
This cable is used to trouble shoot a faulty camera &/or harness versus a faulty DVR video out port.
•
DVRICRC-READER - SD Card Reader
A device used to read the SD Card, connects via USB to a PC.
(C) Intermediate Download Kit-B (P/N: GSX-NTR40X-DPBK-Intermed Kit_B)
•
Same as Intermediate Download Kit (P/N: GSX-NTR40X-DPBK-Intermed Kit) as listed above except
no SD Card Reader.
(D) Advanced Download (P/N: GSX-NTR40X-DPBK-Advanced Kit)
•
Intermediate Download Kit (P/N: GSX-NTR40X-DPBK-Intermed Kit) as listed above.
•
DVRIPLLCD-TV - 7" Wide Screen Handheld LCD TV
Used to connect to the recorder to program Configuration settings and aim cameras.
- 58 -
TM 400 Series User Manual
TM 400 Series recorders installation.
TM 400 software & documents
TM 400
TM 400 Series User Manual, a Read Me
- 11 -