Gps Sources; Table C-2 Gps Source; Ads-B Out; Ads-B In - Garmin GTX 3X5 Installation Manual

C.2

GPS Sources

Manufacturer Model
G950/G1000
Internal
GTN 6XX/7XX
Garmin
GNS 400W/
500W
GNS 480
GTX 3X5
GDL 84/88 with
GPS/SBAS
Notes:
[1] Installations with no TIS.
[2] Installations with TIS (GTX 335 only).
[3] Installations with GDU software v15.00 or later.
[4] Installations with GDU software prior to v15.00.
190-01499-02
Rev. 4
Data Interface
Format Configuration
GTX 33ES #1 [1]
RS-232 OR
GTX 33ES #1 w/ TIS [2]
N/A N/A
RS-232

ADS-B OUT +

HSDB ADS-B In Source: GTX
ADSB TFC
RS-232 ADSB TFC WX
ADS-B OUT +
GTX + [1]
RS-232 GTX w/TIS+ [2]
ADS-B OUT +
ADS-B + FMT 1
RS-232
ADS-B + FMT 2
ARINC 429 743A

Table C-2 GPS Source

GTX 3X5
Configuration
REMOTE FMT 1 [1,3]
OR
Refer to the STC installation manual for guidance. Note that the primary
REMOTE FMT 2 [2,3]
purpose of this interface is transponder control, however this format
LGCY REMOTE 1 [1,4]
also includes GPS data. Refer to table C-9.
OR
LGCY REMOTE 2 [2,4]
Refer to section 6.8.
ADS-B + FMT 1
GTN - Enabled Applicable to GTX 345 installations only.
Applicable to GTX 345 installations only. Note that the primary purpose
GNS of this interface is for ADS-B In Data, however this format also includes
GPS data. Refer to table C-1.
ADS-B + FMT 1 Supports GPS data only.
REMOTE FMT 1 [1]
Note that the primary purpose of this interface is transponder control,
however this format also includes GPS data. Refer to table C-9.
REMOTE FMT 2 [2]
ADS-B + FMT 1
N/A
ADS-B + FMT 2
RINC 743A
Notes
GTX 3X5 Transponder TSO Installation Manual
Page C-3