Direct Call; Making A Direct Call - Motorola DTR600 User Manual

English
1 To initiate a Private Reply, press the Programmable
button during a group call.
The display shows Private Reply On.
2 After a group call, press PTT button to call privately.
The display shows Private Reply.
3 Wait for the Talk Permit Tone to end and speak.

Direct Call

The Direct Call Feature allows a user to call another pre-
determined user that has been mapped into the radio
Programmable button one-on-one privately (this feature
needs to be pre-programmed via CPS*).Users also have
the option to assign the Direct Call feature to any radio
channel instead of the Programmable button.This allows
the radio Programmable button to be available for other
radio features (for example: Private Reply or Mute) and
Direct Call to be set up in a special channel. (You can set
up different direct calls in different channels).
26
NOTICE:
To set up the Direct Call function for the first time in
your radio, (either Programmable button or to a
specific channel) you need to use the CPS
(Customer Programming Software) which is
available for free download at
www.motorolasolutions.com. Once in the CPS, you
must read and upload the radio IDs (identified in
CPS as "privates") into the CPS in order to enable
Direct Call and assign direct calls to specific radios.
For more information refer to
Programming Software.

Making a Direct Call

To initiate Direct Call, you must configure in Customer
Programming Software (CPS) or Radio Advanced Setting
Menu and select the Private Contact as a target radio.
1 Press Programmable button during hang time.
The display shows Direct Call Queue message
and that you are in queue.
http://
Customer