Chapter 2: Getting Started; Turning The Radio On Or Off; Adjusting Volume; Checking Battery Status - Motorola DTR600 User Manual

Professional digital two-way radio limited keypad portable radio
Hide thumbs Also See for DTR600:
Table of Contents

Advertisement

Getting Started
This section helps you to get familiar with the basic
operation of the radio.

Turning the Radio On or Off

To turn on the radio, press and hold the Power button
until the radio vibrates and the display shows Motorola
Logo.
To turn off the radio, press and hold the Power button
(~3 seconds) until the power down screen is shown and
the power down tone is heard.

Adjusting Volume

Press the (+) button to increase the volume, or the (-)
button to decrease the volume,
To mute, press, and hold the (-) button (~2 seconds)
and the display shows Mute icon.
To unmute, press, and hold the (-) button (~2 seconds)
and the radio restores the previous volume.
To maximize the volume, press and hold the (+) button
(~2 seconds). The volume scrolls up fast to maximum
volume. You hear the volume beeps increment as the
volume increases.
NOTICE:
Do not hold the radio too close to the ear when
the volume is high or when adjusting the volume.
There are 16 increments of volume. As the (+)/(-)
buttons are pressed, you hear a beep at the
current volume level. If device is receiving during
volume interaction, received audio is heard at
the new volume instead of beeps.
When using radio with earpiece, make sure to
adjust the radio volume to the lowest volume
before putting on the earpiece. For more
information, refer to
Use only Motorola Solutions approved
accessories. For more information, refer to
Accessories on page

Checking Battery Status

Short press the Power button to check the battery status.
For more information, refer to
The following table describes the icons:
English
Acoustic Safety on page
5.
67.
Battery
Status.
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dtr700

Table of Contents