Ending A Private Reply Or Direct Call; Private Direct Call - Motorola DLR1060 User Manual

Ending a Private Reply Or Direct Call

To end a private or direct call:
• Long press and hold the Programmable Top
Button to end the private or direct call and return
to the current selected channel or talkgroup. An
end tone is heard by both call participants when
the call is ended, or
• Allow call hang timer to expire, effectively ending
the call and return to the current select channel or
talkgroup.
Note: Ending a private or direct call by pressing
and holding the Programmable Top Button
is NOT possible if either radio is
transmitting.
When a private or direct call is ended, an
end tone plays for both call participants
when the call is ended.
Only the call initiatior can end a private or
direct call.

PRIVATE DIRECT CALL

Note: In order to be able to use this feature, the
Programmable Top Button should have
been previously mapped for the Private
Direct Call function. Refer to the "Setting the
Programmable Top Button Options" on
page 39 and "Customer Programming
Software (CPS)" on page 41 for details.
This feature allows you to initiate a private call
to a predetermined user, by pressing the
Programmable Top Button.
Once you press the Top Programmable Button
and if the user on the other end is available, the
Top Programmable Button starts blinking
GREEN. Push and hold the PTT button to talk.
You will hear the distinctive Private Talk Permit
Tone and the Top LED illuminates solid
GREEN to indicate that you are in a private
call. Release the PTT button to hear.
If you press the Programmable Top Button and
the user that you are trying to reach is busy, the
radio gives you a busy tone. The
Programmable Top Button blinks GREEN
indicating you are in queue waiting to talk.
33
English