Led Indicator Of Chargers - Motorola DTR600 User Manual

English
4 Insert the radio or battery into the charging pocket
with the front of the radio or battery facing the LED of
the MUC.
The charger LED flashes a few times to indicate the
current battery charge when the radio is inserted in
the tray rails. The light on the charger is red to
indicate that the battery is charging and turns green
indicates that the battery is fully charged.

LED Indicator of Chargers

The following table explains the LED Indicator shown on
the chargers during that status.
Table 7: Indicators
Status LED Indicator
Green for approx-
Power On imately one sec-
ond
Charging Steady red
2
Normally, re-positioning the battery pack will correct this issue.
3
Battery temperature is too warm or too cold or wrong power voltage is used.
22
Status
Charged
2
Error
Standby
Battery Level
Status
If there is no LED Indication:
• Check if the radio with battery, or the battery alone, is
inserted correctly.
Comments
• Ensure the power supply cable is securely plugged into
the charger socket using an appropriate AC outlet and
-
there is power to the outlet.
-
LED Indicator
Steady green
Fast-blinking red
Slowly blinking
3
amber
Blink red one time
Blink amber two
times
Blink green three
times
Comments
-
-
-
Battery low
Battery medium
Battery high