Set All/Direct Call; Set All Call; Set Direct Call - Motorola TLKR T7 Owner's Manual

UT035AH EN.fm Page 12 Thursday, June 26, 2008 12:45 PM

Set All/Direct Call

Press key in Group Mode to enter All/Direct Call Setting.
At first the user selects a type of Call from All Call
transmission or Direct Call Setting.
All Call Transmission Direct Call Setting
To select this setting, press the
type of Call.

Set All Call

When "All Call Transmission" is selected, press
key to exit from this setting, and transmit All Call
SEL/
immediatley.
Then it sounds All Call Tone.
The display shows TX icon and Call icon blinks while
transmitting.
Press the MENU/GRP key to go back to Idle status.
Note:
12

Set Direct Call

The display shows ID Number on Channel segments and
ID Name blinks on Sub Code segments.
Press the
Press key or SEL/
command.
or key to select a
Then the user transmits Direct Call command to only the
selected ID.
The display shows TX icon and Call icon while transmitting.
key or
The unit sounds the selected Call Tone while transmitting
Direct Call command.
Press the MENU/GRP key to go back to All/Direct
Note:
Call setting.
The ID Number for
Direct Call
The ID Name
key or key to select an ID Number.
key to transmit Direct Call