Transport And Storage - NetterVibration NTP Series Operating Instructions Manual

Drive medium:
Clean (5 µm filter), lubricated compressed air or lubricated nitrogen
Unfiltered compressed air will lead to breakdown of the vibrators.
Operating pressure:
2 bar to 6 bar
The operating pressures must not be exceeded or fallen short of.
Ambient temperature:
Standard 5°C to 60°C
The operating temperatures must not be exceeded or fallen short of.

5 Transport and Storage

Check the packaging for possible signs of transport damage. In the event
of damage to the packaging, check that the contents are complete and
undamaged. If there is any damage, inform the shipping agent.
The vibrators are packed ready-to-
install.
The type label is attached to the vibra-
tor.
Accessories and add-on parts (grom-
mets, silencers) are delivered loosely,
unless otherwise agreed.
Special transport conditions are not
specified.
The storage temperature should be be-
tween –40 °C and 60 °C.
(This does not apply to the operating
temperature; compare with chapter 4
SAFETY
Conditions").
"Permissible Operating
8
Special versions available upon request
The units should be stored in a clean,
dry environment.
NTP piston vibrators must be oiled be-
fore going back into storage (pour ma-
chine oil into air inlet port and activate
shortly).
It is recommended that dirty devices
are cleaned (disassemble, rub deposits
off using oil if necessary, wipe clean,
reassemble).