3 Design and Function
The vibration is generated by a freely
oscillating differential pressure piston.
In the basic version NTP B+C, the
piston strikes against an elastomer
impact
plate,
creating
hammer effect.
Version B has no impact plate; the
piston swings noiselessly against a
cushion of air.
If the device is required to produce
hard impacts, either a steel plate is
inserted into the base plate or the base
plate is completely removed. This
results in hard impacts against the
a
rubber
surface
attached.
The frequency can be continuously
adjusted via the operating pressure,
the amplitude is set by throttling the
exhaust air.
6
to
which
the
device
1
Housing
2
Piston
3
Base plate
4
Cover
6
Screw
7
Screw
8
Air inlet port
9
Air exhaust port
10
Impact plate
is