Technical Data - NetterVibration NTP Series Operating Instructions Manual

2 Technical Data

Drive medium:
Clean (5 µm filter), lubricated compressed air or lubricated nitrogen
Unfiltered compressed air will lead to breakdown of the vibrators.
Operating pressure:
2 bar to 6 bar
The operating pressures must not be exceeded or fallen short of.
Timed operation is compulsory for NTP B+C vibrators
(e.g. duty time 5 s, pause time 25 s).
Ambient temperature:
Standard 5°C to 60°C
The operating temperatures must not be exceeded or fallen short of.
Series NTP piston
available in sizes 25, 32 und 48. In
the standard version NTP B+C, an
impact plate (elastomer
inserted in the base plate, which
creates a rubber hammer effect.
In version B, the impact plate is
removed and the
Technical Data at 2 - 4 - 6 bar
B + C = soft-impacting (impact plate in base plate)
B = without base plate (quiet, due to air cushion)
The technical date are reference values and may vary depending on the application, further data available upon request.
We recommend consultation of the Netter GmbH application engineers. Subject to technical changes.
Noise Level
vibrators are
disc) is
piston strikes
Special designs available upon request
against a cushion of air above the
base plate.
The elastomer insert can be replaced
by a steel
impacting, with high noise level).
An additional
alternative is to mount the vibrator
without a base plate.
4
impact plate (hard-
hard-impacting