1 General Notes
Netter pneumatic piston vibrators series
NTP comply with the EC machine
directive 98/37/EG. Standards DIN EN
ISO 12100 part 1 and part 2 have been
particularly observed.
Series NTP pneumatic piston vibrators
generate linear vibrations or shaking
movements.
These vibrators are used to empty
hoppers and to drive conveyor troughs,
sieves and vibrating tables. General
applications are loosening, feeding,
compaction and separation of bulk
materials and the reduction of friction.
The following instruction and warning symbols are used in these operating instructions.
Note on important procedures
Important note on procedures to
be especially observed
The drive medium is compressed air or
nitrogen, at a pressure of 1 bar to 6 bar.
Series NTP pneumatic piston vibrators
can be used for food production and in
wet areas, provided the corresponding
company operating regulations are
observed.
The frequency can be continuously
regulated by means of pressure regu-
lators or throttles built into the air sup-
ply lines and the amplitude can be con-
tinuously reduced by means of throttles
in the air discharge lines.
Warning of a danger spot
Environmentally friendly disposal
3