Table of Contents
Advertisement
5 Transport and storage
Check the packaging for possible shipping damage.
If damage to the packaging is found check the content for completeness and
IMPORTANT
possible damage. In case of damage inform the freight forwarder.
The units are packed ready for
installation. The type plate is at-
tached to the vibrator. If not other-
wise specified, the vibrator is deliv-
ered with an unbalance setting of
100 %.
When transporting the vibrator
make sure to avoid hard impacts or
vibrations which could damage the
bearings.
The unit should be stored in a
clean, dry environment.
If the vibrator is operated in areas with potentially explosive dust (zone 22),
maintenance by NetterVibration is mandatory after a storage period of more
than a year.
DANGER
The transport eyes are for exclusively
lifting the vibrator.
If the vibrator is fitted with two transport
eyes, both must be used for lifting. The
WARNING
pulling direction must not exceed 45°.
If the vibrator needs to be in storage
for a longer period of time (2 years
max.), the temperature in the storage
area must not fall below -15 °C or be
above +60 °C and the relative air hu-
midity must not exceed 60 %.
10
Advertisement
Table of Contents
