Transport And Storage - NetterVibration NED 605 Operating Instructions Manual

5 Transport and Storage

Check the packaging for possible shipping damage.
If damage to the packaging is found, check the content for completeness and
possible damage. In case of damage inform the forwarding agent.
IMPORTANT
The units are packed ready for
installation. The type plate is at-
tached to the vibrator. If not specified
differently the vibrator is delivered
with an unbalance setting of 100 %.
When transporting the vibrator make
sure to avoid hard impacts or
vibrations which could damage the
bearings.
If the vibrator is fitted with two
transport eyes, both of these should
be used for lifting. The lifting angle
must not exceed 45°.
The transport eyes must solely be
WARNING
used to lift the vibrator.
The unit should be stored in a clean,
dry environment.
If the vibrator needs to be in storage
for a longer period of time (2 years
max.), the temperature in the store
must not fall below -10 °C or above
+25 °C and the relative air humidity
must not exceed 60 %.
10