Button Definition; Normal Operation - BAFANG DP C18.UART Display Manual

BUTTON DEFINITION

Up
Down

NORMAL OPERATION

• ON/OFF switch
Turn on the power, press and hold (>2S)
to power on the display, the display begin
to operate. Press and hold (>2S)
to power off the display. If the bike is not
used, after 5 minutes (time can be set in
"Auto Off") the display will be automatically
turned off. If the password function of the
display is activated, need to input the correct
password to enter into the normal display
interface.
DISPLAY MANUAL DP C18.UART
Headlight
ON/OFF
Mode
again
• Power assistance level selection
In the manual gearshift mode, briefly press
(<0.5S) or to switch the level to
change the assistance power, The lowest
level is Level 0, the highest Level 5. When
the display is on, the default mode is Level
1,"0"means no power assistance.
BUTTON DEFINITION
7