Advertisement
5 Configuring your scanner
There are two ways to configure your scanner:
When connected to host device, you can use the BaracodaManager for multiple settings (refer to
BaracodaManager documentation). Or, you can use configuration barcodes (refer to the programming guide).
To reset the scanner to its "default settings", use BaracodaManager Software (should you experience any
problems, please contact your reseller).
5.1 Usage modes
The scanner runs in two modes. When the scanner is connected to the Bluetooth host device, it uploads the
barcodes as you scan them. When the scanner is out of range, it saves the bar codes in memory. When you
move the scanner back into range, the scanner automatically connects to the Bluetooth host device, and
uploads the saved barcodes.
1. Make sure the scanner is connected by looking at its status in the "my paired devices" window.
2. Check that the application that will receive the decoded bar codes is active.
3. When you have successfully scanned the bar code, you will hear a beep and the green LED will blink.
If you hear three beeps, the scanner's memory is full. Move the scanner back into range of the Bluetooth host
device. The scanner automatically uploads the saved bar codes, and clears its memory. The scanner beeps
three times in descending pitch when it has finished the upload.
6 LED and Beep signals Summary
Discoverable mode
Connected
Sleeping
Good scan
Bar code Memory Full
Uploading
Upload complete
7 Programming Your BL1000
Basic Functions
The BL 1000 can be customized to suit your needs. You can use the bar codes below to turn on or off the
audible beep, clear the memory, or return the scanner to its factory default settings.
Enable All Beeps
BL 1000 user guide
Green LED
Blinks two times every two seconds
Blinks once every two seconds
Does not blink
Blinks once
Blinks three times
Blinks twice per second while the data is
uploading
Blinks once
Disable All Beeps
© Baracoda 2003
Beeper
None
None
None
Beeps once
Beeps three times
None
Three beeps that descend in
pitch
Page 4/6
Advertisement
