Product Overview; Controls - Toro TITAN HD 1500 Series Operator's Manual

Product Overview

1. Height-of-cut deck-lift
pedal
2. Height-of-cut positions
3. Transport lock

4. Controls

5. Motion-control levers
6. Roll bar
Controls
Become familiar with all the controls before you start
the engine and operate the machine
Figure 6).
Control Panel
1. Power port
2. Choke control
3. Throttle control
4. Hour meter
Figure 5
7. Shock assembly
8. Seat belt
9. Fuel cap
10. Parking-brake lever
11. Mower deck
12. Caster wheel
(Figure 5
Figure 6
5. Blade-control switch
(power takeoff)
6. Key switch
7. Switch position for optional
light kit
Key Switch
The key switch, used to start and shut off the engine,
has 3 positions: O
Starting the Engine (page
Choke Control
Use the choke control to start a cold engine. Pull the
choke control up to engage it. Push down on the
choke control to disengage it.
Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting from the S
position (Figure
g227688
Blade-Control Switch (Power
Takeoff)
The blade-control switch, represented by a
power-takeoff (PTO) symbol, engages and
disengages power to the mower blades
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance
and
Safety-Interlock Indicators
There are symbols on the hour meter that indicate
with a black triangle that the interlock component is
positioned correctly
Battery-Indicator Light
If you turn the ignition key to the O
few seconds, the battery voltage displays in the area
where the hours are normally displayed.
The battery light turns on when the ignition is turned
on and when the charge is below the correct operating
g037119
level (Figure
12
, R , and S
FF UN TART
24).
6).
(Figure 6).
(Figure 7).
N
7).
. Refer to
to F
LOW AST
(Figure 6).
position for a