Driving Backward
1.
Move the levers to the center, unlocked position.
2.
To go backward, slowly pull the motion-control
levers rearward
(Figure
Figure 28
28).
g008953
Adjusting the Height of Cut
Using the Transport Lock
The transport lock has 2 positions, and is used with
the deck-lift pedal. There is a L
an U
position for the transport position of the
NLOCK
mower deck
(Figure
Transport-Lock Positions
1. Transport lock knob
2. L
position—The
OCK
mower deck locks into the
transport position.
26
position and
OCK
29).
Figure 29
3. U
position—The
NLOCK
mower deck does not lock
into the transport position.
g037050