GF Signet 276 Differential Series Operating Instructions Manual page 12

Ordering Information cont.
Special Order Options - Please consult the factory
Mfr. Part No. Code
Electrode
3-2774-HF Special Order
3-2775-HT Special Order
3-2775-AU Special Order
3-2776-HT Special Order
3-2776-HF Special Order
3-2777-HT Special Order
3-2777-AU Special Order
Special Order Options- Please consult the factory
Accessories and Replacement Parts for all pH
Mfr. Part No. Code
Calibration
3-2759 159 000 762
3-2759.391 159 000 764
3-0700.390 198 864 403
3-2700.395 159 001 605
3822-7115 157 001 606
3822-7004 159 001 581
3822-7007 159 001 582
3822-7010 159 001 583
3800-5000 159 838 107
Accessories and Replacement Parts for 275X
1224-0205 159 000 836
Accessories and Replacement Parts for 276X
3864-0001 159 001 007
3864-0002 159 001 008
2120-0015 159 001 009
2122-0015 159 001 010
Georg Fischer Signet, LLC, 3401 Aerojet Avenue, El Monte, CA 91731-2882 U.S.A. • Tel. (626) 571-2770 • Fax (626) 573-2057
For Worldwide Sales and Service, visit our website: www.gfsignet.com • Or call (in the U.S.): (800) 854-4090
For the most up-to-date information, please refer to our website at www.gfsignet.com
3-2764.090 Rev 9 11/18 English
Description
Flat glass pH electrode for hydrofl uoric acid applications <2%, DryLoc connector, in-line sensor, NPT
Flat surface ORP electrode, high temperature (110 °C, 230 °F), DryLoc connector, ¾" NPT,
3KΩ RTD, in-line install only
Flat surface ORP electrode, gold measuring electrode, DryLoc connector, NPT, in-line sensor
Bulb glass pH electrode with protection, high temperature (110 °C, 230 °F), DryLoc connector,
¾" NPT, 3KΩ RTD, in-line install only
Bulb glass pH electrode with protection, hydrofl uoric acid applications <2%, DryLoc connector,
in-line sensor, NPT
Bulb ORP electrode with protection, high temperature (110 °C, 230 °F), DryLoc connector, ¾" NPT,
3KΩ TRD, in-line install only
Bulb ORP electrode with protection, gold measuring electrode, DryLoc connector, in-line sensor, NPT
Description
pH/ORP System Tester
Adapter Cable for use with 2751, 2760
pH Buff er Kit (includes 4.0, 7.0, and 10.0 buff er powder)
Calibration Kit: includes 3 PP cups, cups stand, 1 pint pH 4.01, 1 pint pH 7.00
20 g bottle Quinhydrone for ORP calibration (must use pH 4.01 and/or pH 7.00 buff er solutions)
pH 4 buff er solution, 1 pint (473 ml) bottle
pH 7 buff er solution, 1 pint (473 ml) bottle
pH 10 buff er solution, 1 pint (473 ml) bottle
3.0M KCl storage solution for pH and ORP, 1 pint (473 ml) bottle
O-ring, EPR (EPDM)
Replacement salt bridge (2764-2767)
Replacement reference electrolyte solution, 500 ml
CPVC adapter: 1½ in. to 1 in.
PVDF adapter: 1½ in. to 1 in.
© Georg Fischer Signet LLC 2018