B.Excessive water usage. B. Reduce days between,
backwashing
(see timer instructions), make sure
that there is not a leaking valve in the
toilet bowl or sinks.
Hot water tank rusty.
C.Repeated flushings of the
hot water
tank is required.
D.Leak at distributor tube.
D.Make sure distributor tube
is not cracked, check 0-ring
and tube pilot.
E.Defective or stripped filter medium bed.
E.Replace bed.
F.Inadequate backwash flow rate.
F.Make sure filter has
correct drain
flow control, be sure flow control
is not clogged or drain
line restricted, be sure water
pressure has not dropped, increase
backwash flow rate according to
specifications for your
unit, see your dealer for
recommendations.
Loss of water pressure. A.Iron or turbidity build-up in water filter. Reduce days
between backwashing
so filter backwashes more often,
make sure filter is sized large enough
to handle water usage.
B.Inlet plugged due to foreign material
B.Remove piston and clean control.
broken loose from pipes by recent work
done on plumbing system.