Water Conditioner Flow Diagrams - Fleck 5600 Service Manual

MODEL 5600 & 5600 ECONOMINDER

Water Conditioner Flow Diagrams

1
SERVICE POSITION
Hard water enters the unit at the valve inlet - flows
around the lower piston groove - thru the passage to
the top of tank - down thru the resin and enters the
distributor as conditioned water. The conditioned
water flows up thru the center tube to the valve outlet.
Page 16
2
PRELIMINARY RINSE POSITION
5 Minutes
Hard water enters the unit at the valve inlet - flows around
the lower piston groove - down thru the top of tank
passage - downward thru the resin - up the distributor tube
- thru the center hole in the piston - over the top edge of
the piston and out the drain line.
Printed in U.S.A.
®