Related Manuals for SIIG CE-H24W11-S1
Summary of Contents for SIIG CE-H24W11-S1
- Page 1 4x4 HDMI 2.0 4K HDR Matrix Switch with Cloud Control User Manual 04-1197A P/N: CE-H24W11-S1...
-
Page 2: Safety And Notice
Safety and Notice The 4x4 HDMI 2.0 4K HDR Matrix Switch has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, the 4x4 HDMI 2.0 4K HDR Matrix Switch should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. - Page 3 Thank You for your purchase! Features • HDMI2.0a compliant • Supports 4K2K@60 4:4:4 8bits • Supports HDR*, which is 4K2K@60 4:2:0 10bits • Supports resolution downscaling from 4K2K to 1080P • HDCP1.4 & HDCP 2.2 compliant • Single-link 594MHz [18Gbps] •...
- Page 4 Layout Front Panel Power Switch: Selected Source Status LED: When users use port channel push button, the indicator LED will show the selected source. Port 1-4 Channel Push Button: Select input channel Source Status: Input source detection LED IR SENSOR: for receiving the IR commands from IR remote Rear Panel INPUT 1-4: HDMI inputs OUTPUT 1-4: HDMI outputs...
-
Page 5: Operation Approach
Application Operation Approach Method A: Push-in Button • Use Port 1-4 Channel Push Button to select the source • Input1~4 can be selected in order Method B: IR Remote Control Button Function Standby mode Power on the matrix switcher MUTE Turn off output’s video &... - Page 6 • IN/OUT Switch Operation Procedure IN/OUT Switch Push the button on the checkerboard to select input & output port Ex: Input 2 Push the red circle button as below to select input 2 To Output 3 to output 3 • Example of function key Procedure Operation Mute + A~D(Output 1~4) + Take...
- Page 7 Method C: Software control through RS-232 port Please go to SIIG’s website. Use product number “CE-H24W11-S1“ to find & download the software Connect the Matrix via RS-232 cable (cable not included). Baud rates: 115200 Run the control software and select the proper COM port from the drop down box, then click the serial port icon on the upper left corner of the application box to connect to the Matrix.
- Page 8 2. EDID page • Learn EDID from Default to Input (1) Select Default EDID (1-17 Default EDID) (2) Select designated Input (3) Click “Apply” button to learn from default EDID • Learn EDID from Display to Input (1) Select display (2) Select designated Input (3) Click “Apply”...
- Page 9 3. Rename page • Rename I/O: (1) Rename the Inputs (2) Rename the Outputs • Rename Mapping: (1) Rename the Mappings...
- Page 10 4. System page Network-DHCP mode: For networks with DHCP server • Select DHCP and click “Read” button to get the IP address Information Network-Static mode • Click Static and then key in the “IP”, “MASK”, “GATEWAY” information. After setting IP address, please click “Save” button to save IP address Information “Save”...
- Page 11 5. Firmware page Main Board Using RS-232 cable connect the device and your PC Before you start to update, please make sure you have secured the connection between your computer COM port and the device. Click the “Open Dialog” button to open the firmware update window Click the “File”...
- Page 12 Output Using RS-232 cable connect the device and your PC Click the “Open Dialog” button to open the FW Updated window. Click the “File” button to select the firmware file Click the “Upgrade” button will start to update After updating, please power cycle the device IN OUT Using USB Micro-B cable connect the device and your PC Click the “Open Dialog”...
- Page 13 Method D: Control through Web The default IP address: 192.168.1.70 I/O Routing Tab...
- Page 14 Rename I/O, Mapping Tab EDID Tab...
- Page 15 Method E: Control through "intriCloud" on internet Create Account The first time you use the intriCloud service, please create a new account. Access intriCloud (www.intri.cloud) and click “Create new account”. The Registration page will pop up, please fill in your email and password information to create your private account.
- Page 16 Add Device to intriCloud First, please make sure the Matrix is connected to your Ethernet with internet access. Connect the Matrix to your PC via a RS-232 cable. Confirm the status of software is connected Click on Read to get an Association Code. Write down this code. Access your intriCloud account or use intriCloud APP, then log in to your account.
- Page 17 Enter the Association code and click Apply for pairing with your Matrix. After adding the device, the device name will show on the upper right corner. You can click the button to switch to device control.
- Page 18 Method E: Amazon Echo (Alexa) control Connecting your intriCloud to Alexa. Make sure your Echo device is linked to your Amazon account before continuing. Go to alexa.amazon.com. Create an account or login using an existing amazon account. Install intriCloud for Echo. Search using keyword “Intri Cloud” in Skills page and click “Enable”.
- Page 19 Click “Link Account“ and the “IntriCloud” sign in box will pop up. Type in your Intri Cloud account and password, to successfully link Intri Cloud and Amazon Alexa.
- Page 20 Voice Control Step 1. ""Alexa, open la la land"" (into IntriCloud) Step 2. ""list device"" (What device connected to your IntriCloud ) Step 3. ""select device"" (Select the device which you want to control) Step 4. ""play (input) on (output)"" (adjust your display array) Voice Commands Command...
-
Page 21: Edid Learning
EDID Learning The EDID learning function is only necessary whenever you encounter any display on the HDMI output port that cannot play audio and video properly. Because the HDMI source devices and displays may have various level of capability in playing audio and video, the general principle is that the source device will output the lowest standards in audio format and video resolutions to be commonly acceptable among all HDMI displays. - Page 22 Can every TV work with the HDMI matrix? Basically, the answer is YES. But if your TV can not support 1080p, please refer the EDID LEARNING section to learn EDID from your TV. What is EDID? Why do I need to learn EDID? EDID contains the whole information of the display such as the resolution and audio setting which this display can support.
- Page 23 My TV can support 1080p, but why there is no audio? The factory default EDID of this device is 1080p & 2ch audio. However, there would be a problem after you change to use 1080p & 7.1ch if the TV cannot support 7.1ch audio. Please use the default EDID,1080p &2ch audio.
- Page 24 Support For more info or tech support http://www.siig.com/support Nov, 2018 Copyright © 2018 by SIIG, Inc. All rights reserved.
Need help?
Do you have a question about the CE-H24W11-S1 and is the answer not in the manual?
Questions and answers