Download
Share
Print this page
  1. Manuals
  2. Brands
  3. SIIG Manuals
  4. Matrix Switcher
  5. CE-H21F11-S1
  6. Quick installation manual

SIIG CE-H21F11-S1 Quick Installation Manual

4x4 hmdi 1.3 cat5e
Hide thumbs

Advertisement

Quick Links

Download this manual
Introducing the 4x4 HDMI 1.3 CAT5e Matrix
The 4x4 HDMI 1.3 CAT5e Matrix provides the most flexible
and cost effective solution in the market to route high
definition video sources plus multi-channel (up to 7.1-
channel) digital audio from any of the four HDMI sources
to the remote displays.
Features and Benefits
•
HDMI 1.3c and HDCP compliant
•
Chipset: Silicon Image
•
Video bandwidth: 10.2 Gbps (single-link 340MHz)
•
Input TMDS signal: 1.2V (peak-to-peak)
•
Input DDC signal: 5V (peak-to-peak)
•
Resolution: 480i / 480p / 720p / 1080i / 1080p
(60Hz)
•
Transmission:
-720p/1080i (HD): 165ft (CAT5e) & 180ft (CAT6)
-1080p (full HD): 115ft (CAT5e) & 130ft (CAT6)
•
Power supply: 5V DC, 6A
•
Power consumption: 20 Watts (max)
•
Housing: metal (for better RF shielding)
04-0554A
4x4 HDMI 1.3 CAT5e Matrix
Quick Installation Guide
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the CE-H21F11-S1 and is the answer not in the manual?

Questions and answers

Related Manuals for SIIG CE-H21F11-S1

Summary of Contents for SIIG CE-H21F11-S1

  • Page 1 4x4 HDMI 1.3 CAT5e Matrix Quick Installation Guide Introducing the 4x4 HDMI 1.3 CAT5e Matrix The 4x4 HDMI 1.3 CAT5e Matrix provides the most flexible and cost effective solution in the market to route high definition video sources plus multi-channel (up to 7.1- channel) digital audio from any of the four HDMI sources to the remote displays.

  • Page 2: Package Contents

    Package Contents • 1x Matrix Transmitter • 4x Matrix Receiver • Power Adapter • IR emitting extension cable • 4x IR receiving extension cable • IR Remote Controller • Installation CD • Quick Installation Guide Layout Figure 1: Transmitter Front Layout Power: Power indicator LED IR: IR receiver LED Input: Input source indicator LED (1-4)
  • Page 3 7 8 9 1 0 Figure 2: Transmitter Back Layout ON–OFF: Power ON/OFF RS-232: RS-232 control port +5V DC: 5V DC power jack 10. SW Main: DIP switches (see DIP Switch below in the next page) 11. SW 1–SW 4: DIP switch (see DIP Switch in the next page) 12.
  • Page 4 SW 1-SW 4 for EDID/Audio DIP Switch Position Description Video Audio Pin #2 Pin #1 Default Mode : 1080 & Stereo 1080p Stereo Safe Mode : Enforce the system output at 720p/1080i video and 720p Stereo stereo audio for basic compatibility EDID Learning Mode : For learning Bypass...
  • Page 5 EDID Learning: Set Pin#1- ON first then connect the HDMI Input to the HDTV through an HDMI cable. Wait for 20 seconds. The EDID of the display will be saved. If you want to learn the EDID from another HDTV, you must set Pin#1 at OFF first and repeat this process.
  • Page 6 TMDS +5V DC Figure 4: Receiver Back Layout • +5V DC: 5V power jack (optional) Note: The 4x4 HDMI 1.3 CAT5e Matrix has been tested extensively and found that it doesn’t require an external power supply. However, if you find it not working please connect a 5V power supply similar to the power supply that powers the Transmitter.

  • Page 7: Hardware Installation

    • IR2: IR emitting cable connected here. Transmits IR command signals from the remote receivers that are connected to input channel 2 (IN 2) • IR3: IR emitting cable connected here. Transmits IR command signals from the remote receivers that are connected to input channel 3 (IN 3) •...

  • Page 8: Operation And Ir Control

    The 4x4 HDMI 1.3 CAT5e Matrix as receiver Connect each HDMI output to HDMI displays. Connect the TMDS input on the Matrix Receiver to the TMDS output on the Matrix Transmitter. Connect the DDC input on the Matrix Receiver to the DDC output on the Matrix Transmitter.
  • Page 9 Power On HMDI output #1 HMDI output #2 HMDI output #3 HMDI output #4 Figure 5: Remote Control Use the left or right keys to select input source device and wait a few seconds for the audio/video of the next channel to appear. Note: If the setting is correct, the corresponding LED will flash.
  • Page 10 Press hot key, F1-F4, for input source. Please refer Figure 5 in page 9. Method B2: IR remote control for controlling the HDMI sources Users can use the corresponding IR remote to control respective DVD player or any HDMI compliant devices including Matrix Receiver itself with IR control at any display site.
  • Page 11 • Scan: Clicking this button will start searching all the available COM ports (1-255). If the matrix is detected, the window on the left will show up. Otherwise, the window on the right shows up to indicate no device can be found. •...
  • Page 12 Figure 7: Input Channel • Input Channel: Select the input channel • Bitmap Path: Select the figure for each channel. Notice that only pictures in BMP format are supported • Description: Channel description...
  • Page 13 Blank Page...
  • Page 14 Blank Page...

  • Page 15: Technical Support And Warranty

    Step 1: Submit your RMA request. Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued. Step 2: After obtaining an RMA number, ship the product.
  • Page 16 Fremont, CA 94538-3152, USA Phone: 510-657-8688 4x4 HDMI 1.3 CAT5e Matrix is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Other names used in this publication are for identification only and may be trademarks of their respective companies.