Table of Contents
Advertisement
10 Configuration and Use - PPP & IP Routing
Adding entries
Detailed configuration
Deleting entries
90 / 254
Proceed as follows:
1. Browse to the 'PPP' page.
2. Select the phonebook entry from the 'Name' pop down list.
Note: In case the presented phonebook entries do not suite your desired
configuration, you must firstly create a correct phonebook entry. See
section 12.2 for more information.
3. Select the encapsulation method for the PPP entry from the
'Encap' pop down list (per default set to VC MUX).
4. Click
.
5. Optionally, click
configurations in the 'Authentication', 'Routing' and 'Options'
tables.
See section 10.4 for more information.
6. Click
Prior to using the PPP entry you may need to enter additional
configurations for the connection.
See section 10.4 for more information.
On the 'PPP' page, click
want to delete. As a result your selection is deleted. Click
.
to enter the appropriate
to finish the procedure.
next to the idle PPP entry you
3EC 17605 AAAA TCZZA Ed. 02
Advertisement
Table of Contents
