Table of Contents
Advertisement
14 Networking - DNS
Configuring the DNS
server
Adding leases
manually
174 / 254
Check the 'Server active' checkbox to enable the AST710 DNS
server.
In the 'Domain name' field you can enter the domain name of
your LAN. This name is communicated by the DNS server to the
local PCs, and is subsequently used by the PCs to complete a DNS
request.
You can add leases manually in case the devices need reserved
DNS hostnames, e.g. for devices which do not support DNS.
Proceed as follows:
1. Enter the following information in the 'DNS hostname' table:
The DNS hostname for the device
D
The IP address of the device.
D
2. Click
and
to finish the procedure.
3EC 17605 AAAA TCZZA Ed. 02
Advertisement
Table of Contents
