Alcatel SPEED TOUCH 710 User Manual page 149

Setting an IP address
via the 'Routing' page
3EC 17605 AAAA TCZZA Ed. 02
4. Click . As a result the new IP settings are applied:
5. To verify connectivity, point your Web browser to the new IP
address. Make sure though that your PC shares the same
subnet.
6. Click
storage.
Proceed as follows:
1. Click
up the 'Routing' page (See section 19.2 for more
information). On this page the following 'IP Address' table
can be found:
2. Enter the following information:
Select eth0 from the 'Intf' drop down list
D
Enter an IP address in the 'IP Address' field, e.g.
D
192.6.11.150
Enter an associated (sub)netmask in the 'Netmask' field,
D
e.g. 255.255.255.0
3. Click . As a result the new IP settings are applied.
4. To verify connectivity, point your Web browser to the new IP
address. Make sure though that your PC shares the same
subnet.
5. Click
storage.
to store the applied IP settings to permanent
in the left pane of the AST710 pages to pop
to store the applied IP settings to permanent
13 Networking - IP
149 / 254