Table of Contents
Advertisement
The 'Voice
Configuration' table
'Voice Configuration'
table components
Configuring VoDSL
connectivity
3EC 17605 AAAA TCZZA Ed. 02
The following figure shows the 'Voice Configuration' table:
Field
Description
Gateway
Indicates the gateway protocol is used at the CO for VoDSL
Protocol
connectivity. The AST710 VoDSL service supports the
ALCATEL/COPPERCOM gateway protocol only.
Destination
Indicates the VPI/VCI values of the ATM VC, configured for
VoDSL service.
The allowed VPI range: from 0 up to 15.
The allowed VCI range: from 32 up to 511.
Note: The VoDSL VC is by default configured on
VPI/VCI=0/40.
Proceed as follows:
1. Browse to the 'VoDSL ' page.
2. Enter the following parameters:
VPI value of the VoDSL VC
D
VCI value of the VoDSL VC.
D
3. Click
and
15 Voice - Voice over DSL
to finish the procedure.
181 / 254
Advertisement
Table of Contents
