Chapter 2: Hardware Installation; Installation Restrictions - NCR RealPOS X Series User Manual

Hardware Installation
Chapter 2:

Installation Restrictions

• Before installing the NCR RealPOS X-Series Display, read and follow the guidelines
• Install the display near an electrical outlet that is easily accessible. Use the power
• Use a grounding strap or touch a grounded metal object to discharge any static
Caution: This unit contains hazardous voltages and should only be serviced by
qualified service personnel.
Caution: This device should only be powered by a power supply source which meets
Safety Extra Low Voltage (SELV) and LPS (Limited Power Source) requirements per
UL1950, IEC 950, and EN 60 950. The power source must be certified by the appropriate
safety agency for the country of installation.
Caution: Use a grounding strap when installing this feature.
in the RealPOS X-Series Displays (5968/5985) Site Preparation Guide (BCC5-0000-5292)
and the NCR Workstation and Peripheral AC Wiring Guide
cord as a power disconnect device.
• Do not permit any object to rest on the power cord. Do not locate the display
where the power cord can be walked on.
electricity from your body before servicing the display.
(BST0-2115-53).