Hardware Installation
Cable Routing
Routing Cables for Strain Relief
The display features a zip tie attachment to prevent cable strain on the cable connectors.
Cables are zip tied together at the display head and routed into the mount or stand. An
extended latch is featured on the reusable zip tie to aid with quick removal without
cutting the tie or damaging the wires.
Caution: Do not cut the zip tie.
1. Route the cables up though the mount or stand.
2. Insert the cables into their respective sockets.
3. Open the zip tie by disengaging the zip tie latch from the "teeth." Use fingernail or
small screw driver to gently disengage the latch.
2-25