Hardware Installation
Chapter 2:
Installation Restrictions
Before installing the NCR XL15W (5916) Display, read and follow the guidelines in the
NCR XL15W (5916) Display Site Preparation Guide and the NCR Workstation and
Peripheral AC Wiring Guide (BST0-2115-53).
• Install the display near an electrical outlet that is easily accessible. Use the power
• Do not permit any object to rest on the power cord. Do not locate the display where
• Use a grounding strap or touch a grounded metal object to discharge any static
cord as a power disconnect device.
the power cord can be walked on.
electricity from your body before servicing the display.
Caution: This device should only be powered by a power supply source which
meets Safety Extra Low Voltage (SELV) and LPS (Limited Power Source)
requirements per UL1950, IEC 950, and EN 60 950. The power source must be
certified by the appropriate safety agency for the country of installation.
Caution: Use a grounding strap when installing this feature.