Installing The Display - NCR RealPOS X Series User Manual

Hardware Installation 2-17

Installing the Display

The display can be mounted using a variety of mounts.
• X-Series Table Top Stand (5968-F031/K031, 5985-F031)
• XL Series Table Top Stand (5968-F033, 5915-K033)
• XR Series Table Top Stand (7702-K031)
• Integration Tray Mount (5968-K024)
• Checkstand Mount (5968-K039)
• Wall Mount (7702-K320)
• X-Series Display Extension Arm (7702-K453, For 10.4" and 15" Displays only)
• Pole Mount (5985-F300 with 5934-K020, For 5985 10.4" Display only)
• Third-Party VESA Mounts
This chapter explains how to perform an "Out-of-box" installation of a display
configured with the X-Series Table Top Stand (5968-F031/K031, 5985-F031) and how to
connect cables. The display comes fully assembled and ready to use. All that is required
to install is connect the AC Power Cord and host terminal cables.
For installation procedures for the other mounting options see their associated kit
instructions.