Chapter 2: Hardware Installation; Installation Restrictions; Ergonomic Workplace; Installing The Xl55P Payment Display - NCR XL55P User Manual

Hardware Installation
Chapter 2:

Installation Restrictions

Before installing the NCR XL55P Payment Display (1607), read and follow the guidelines
in the NCR XL55P Payment Display (1607) Site Preparation Guide (BCC5-0000-5561) and
the

Ergonomic Workplace

Due to the high brightness LCD of the NCR XL55P Payment Display (1607), refer to the
following recommendations for an ergonomic workstation:
• Avoid direct–glaring and reflective–glaring light. When installed next to windows,
• If possible, avoid reflective glaring caused by electric light sources.
• Position the device for ideal viewing angles.

Installing the XL55P Payment Display

To install the XL55P Payment Display, follow these steps:
1. Connect one end of the USB Cable to the USB port located on the underside of the
NCR Workstation and Peripherals AC Wiring Guide
position the device so it does not reflect the outside light.
XL55P Payment Display.
(BST0-2115-53).